Fuel

Fuel

Grid List

Set Descending Direction

1-20 of 25

Page:
  1. 1
  2. 2
  1. Poseidon LL Fuel Fill A1 Boat Hose
    NZ$100.00

    Type : Rubber - Petrol S&D Hose, Fuel suction and delivery hose, fire resistant, used in pleasure boats

    Standards: European directives 94/25/CE ISO 7840:04 A1, RINA Approved. SAE J 1527:04. USCG Type A1 Style R2.

    Application: hardwall hose suitable to convey fuel with an aromatic content up to 50% in pleasure boats up to 24m length. Suitable to be installed even with narrow bending radius.

    Temperature: from -30°C (-22°F) to +100°C (+212°F).

    Construction Tube: black, smooth, synthetic rubber. Reinforcement: high strength synthetic cord plus steel helix wire.

    Cover: black, smooth (wrapped finish), self-extinguishing synthetic rubber, oil, abrasion, and weathering resistant.

     

    View PDF

    Learn More
  2. Puerto Rico Petrol S&D
    NZ$100.00

    Type : Rubber - Petrol S&D Hose; Fuel and oil suction and delivery hose

    Application: hardwall hose used for the suction and delivery of petroleum products with aromatic content up to 30%.

    Temperature: from -20°C (-4°F) to +70°C (+158°F).

    Construction Tube: black, smooth, NBR rubber.

    Reinforcement: high strength synthetic cord, antistatic copper wire, and steel helix wire.

    Cover: black, smooth (wrapped finish), synthetic rubber, weathering and oil resistant.

    Brand : IVG

    Also available upon request: 1.Different diameters 2.Different working pressures 3.Puertorico Super 50% aromatic content.

     

    View PDF

    Learn More
  3. PVC LPG
    NZ$100.00

    Type :  PVC LPG Hose 

    Gas Type: LPG and Natural Gas

    Product Approved under sections 3-6 AS/NZS5601 Part 1:
    Section 4-8.3 Hose Assembly
    Section 6-10 Installation Gas Appliances Appendix A Approved Documents

    Product Approved under AS/NZS5601 Part 2:
    Section 5-1.4.1 High Pressure Piping Section 5-1.4.2 Low Pressure Piping

    Comments:
    PVC Gas hose approved to AS1869. Class C.

    Maximum working pressure: 2600kPa

    Temperature: -20°C to +65°C

     

    Learn More
  4. Mann Tek Safety Break Away Couplings - Marine SB
    NZ$100.00

    Type: Safey Break Away Coupling

    Description: Marine version of SB Couplings are designed to be installed within a hose string, where the coupling would have a length of hose attached to both sides.

    This coupling incorporates the same internal mechanism as our Industrial couplings, but has additional external features that provide increased resistance to torsional and bending moment forces which may be applied to the coupling, preventing premature activation in the unpredictable marine environment.

    Learn More
  5. Mann Tek Safety Break Away Couplings - Industrial SB
    NZ$100.00

    Type: Indistrial SB Couplings 

    Description: Industrial Break-away coupling is utilized all industrial product transfer installations.

    Indistrial SB Couplings are designed to be able to activate with a tensile force being applied at an angle to the plane of the coupling housing, up to 90 degrees.

    Learn More
  6. Mann Tek DDC Dry Disconnect Couplings
    NZ$100.00

    Type: Dry Disconnect Coupling

    Connections: ¾", 1" and 1¼" in BSP, NPT or metrical thread, or flanged inlet.

    Applications: For industrial process plant, road and rail tankers, IBC containers, pharmaceutical and petrochemical industries, diesel locomotive refuelling etc. Recommended for all types of mini bulk liquid product transfer, including container and drum filling, or on any application where spillage needs to be minimized.

    Media:

    Petroleum products: gasoline, diesel, oil etc.

    Chemical products: ethylene oxide, propylene oxide, acrylonitrile, butadiene, ammonia, vinyl chloride, toluene, xylene, sulphuric acid, phenol etc.

    Gas: vapor recovery/balance systems for various media. Material of Body Aluminium, brass, stainless steel, Hastelloy and PEEK. Others on request.


    Seals: Standard seals in FPM (Viton®) - alternatively EPDM, FKM (Chemraz®, Kalrez®), NBR/HBNR. Other materials on request.

    High Flow Rates / Low Pressure Drop: Allows maximum product transfer with minimal losses

    Recommended Maximum Flow Rates: 200 litres / minute (fuel)

    Selectivity: avoid mixing products To avoid product contamination caused by connecting a hose unit to the wrong tank unit, selective versions of the hose and tank units are available. Each unit has a number of selective positions, designated by a coded part number according to the coupling size – specify when placing order. 

    Interchangeability: Compatible with couplings of other manufacturers.

    Hose Unit with Integrated Swivel: All hose units are supplied with an integrated swivel.

    Learn More
  7. Piusi Filters for Bio-Fuel
    NZ$100.00

    BIO-FUEL FILTER - Cartridge filters and water absorbing filters. Water separating filter. The delivery filter is a water absorbing cartridge. These filters guarantee the fundamental protection of motors using station dispensed diesel. This type of filter characteristically separates and absorbs any water present in the pumped diesel. The absorption of water however gradually causes a reduction in filtering capacity and consequently increases head loss caused by the filter. All waterlogged filters should be replaced.

    Performance:
    Filtering capacity 30 µm
    Flow rate 70 - 150 l/min
    Operating pressure 3.5 bar
    Bursting pressure 10 bar

     
     
    Learn More
  8. Conti Flexsteel Petrol
    NZ$100.00

    Description: Flexsteel Petrol Pump hose is a premium hardwall hose which offers the ultimate in kink resistance, low volumetric expansion, service life, and reliability. Meeting the performance criteria of AS2683-1989 Type 4. Grade 2. Kind 1 & 2 and BS3395-1989 Type 3. It is single braid of high tensile wire reinforcing, coupled with Continental ContiTech®'s specially developed compounds (intrinsically conducting), make this the safest and most durable hose available for this application 

    Construction:

    Tube: Black Chemigum· (Nitrile).
    Cover: Black Chemivic· (Nitrile blend).
    Reinforcement: Single braided high tensile wire.


    Temperature: -29°C to 82°C

    Type 4, Grade 2, Kind 1 & 2 250 Kpa W.P

     

    View PDF

    Learn More
  9. Marine Master Fuel Line 500 - C5M USCG Type A
    NZ$100.00

    Applications: All commercial and recreational vessel fuel line applications. Suitable for marine diesel, gasoline, B100 bio-diesel, gasohol fuels and hot oil applications.

    Temperature: -20°C to +100°C continuous service.

    Construction:

    Tube: Type C (Nitrile).Black. Oil and heat resistant.

    Reinforcement: Braided, high tensile steel wire.

    Cover: Type C2 (Modified Nitrile). Blue.

    Learn More
  10. Conti Automotive Fuel Line
    NZ$100.00

    Description: Multipurpose hose for use on fuel line, PCV and EEC systems. The hose cover is oil and petrol resistant and withstands exposure to fuel, vapor, moisture and high heat up to 125°C. The rubber tube is specially compounded to resist diesel, oil and unleaded petrol and blends of ethanol, methanol and others. Meets or exceeds the requirements of SAEJ30R6 & SAEJ30R7.

    Construction:

    Tube: Black Nitrile to resist ozone, heat and petroleum products.
    Reinforcement: Synthetic textile.
    Cover: Chlorosulfonated Polyethylene (CSM) to resist ozone, heat and oil.

    Temperature: -40°C to 125°C

    Learn More
  11. Fuel Master LP350 25Bar
    NZ$100.00

    Applications: LP350 is designed to convey liquid or gaseous propane, butane, or a combination of the two. Consumer applications include gas grills, heaters, torches, and other outdoor equipment. It can also be used as an industrial transfer hose and for natural gas under certain conditions such as open/outside areas and well ventilated factory buildings (if local building codes permit).

    NOTE: Not recommended for residential or office buildings. Contact Gates Customer Service for inspection and assembly testing information. LP350 is for LPG and natural gas applications only. Do not use for anhydrous ammonia or refrigeration applications.

    Temperature: --40°C to +82°C continuous service.

    Warning: Do not convey LP Gas over +60ºC

    Construction:

    Tube: Type C (Nitrile) 1-1/4”. Black.Type A (Neoprene) 1-1/2”, 2” and 3”. Black

    Reinforcement: Braided, high tensile synthetic textile cord.

    Cover: Type A (Neoprene). Black. All sizes are perforated.

    For your safety: Use permanent fittings only.

     

    Learn More
  12. Fuel Master Curb 101 - Gasflex
    NZ$100.00

    Type: Rubber - Fuel Hose

    Applications: Dispensing all types of commercial petrol's, or other petroleum based products, from service station pumps. A heavy duty hardwall hose which does not collapse in reel use or behind the nozzle in heavy duty service.

    Temperature: -30°C to +49°C continuous service.

    Construction:

    Tube: Type C (Nitrile). Black.
    Reinforcement: Braided, high tensile steel wire.
    Cover: Type C2 (Modified Nitrile). Black.

    Standards: AS 2683/2000 Type 4 grade 2 kind 1& 2

    Learn More
  13. MPI Fuel Injection - Barricade
    NZ$100.00

    Gates Barricade MPI Fuel Injection Hose protects against the fuel mixtures of today's modern fuels. Approved for use with Gasoline, Ethanol/Gasoline blends (gasohol) such as E10, E15 or E85, Diesel, Biodiesel including soybean methyl ester (SME), rapeseed methyl ester (RME), palm methyl ester (PME), Biodiesel/Diesel blends such as B20, and 100% Methanol.

    Features:

    > 225 psi
    > Aramid Reinforcement Spiral Braid
    > Exceeds SAE J3OR14T2 as well as low-permeation requirements for CARB
    > Oil, Heat, Ozone & Abrasion-Resistant Cover

    Temperature Rating: -40° F to 275° F (-40° C to 135° C) continuous, up to 302°F (150°C) intermitten

    Note: Do not submerse in gasoline.

    Learn More
  14. Marine Master Fuel Line (SAE 30R7)
    NZ$100.00

    Application: Fuel line applications to provide flexible connections between rigid fuel distribution lines and the engine. Also for use in evaporative emission control systems and as a vent line.

    CAUTION: Not recommended for fuel injection systems.

    Temperature: -40°C to +125°C continuous service.

    Construction:

    Tube: Type C (Nitrile). Black. Oil, gasoline and gasohol resistant.
    Reinforcement: Synthetic, high tensile textile.
    Cover: Type C2 (NBR/PVC). Black. Fuel, oil, ozone and high temperature resistant.
    Design Factor: 4:1

    Standards: Exceeds requirements of SAE 30R6 and SAE 30R7.
    Hose is NMMA type accepted.
    Tube: ARPM (Class A) High oil resistance.

    Learn More
  15. Petrol S&D Genova Global LL
    NZ$100.00

    Type: Rubber - Fuel and oil suction and delivery hose

    Standards: AS2683, EN 12115:11 (16 bar), EN 1761 (10 bar), ISO 2929 (10 bar), TRbF.

    Application: hardwall hose used for the suction delivery of unleaded gasoline and fuels with aromatic content up to 50%, suitable for use as a tank truck or tank wagon hose. Hose checked and approved by INERIS for use in ATEX areas.

    Temperature: -30°C(-22°F) +90°C(+194°F), w/peaks 110°C(230°F).

    Construction Tube: black, smooth, NBR1 antistatic rubber. Reinforcement: high strength synthetic cord plus steel helix wire.

    Cover: black, smooth (wrapped finish), antistatic, synthetic rubber, weathering, abrasion, ozone and oil resistant.

    Electrical Resistance: Ω/T, electrically conductive hose, R≤1x106 Ω/ lgth. The hose can be used in ATEX areas.

    Learn More
  16. Piusi K200 Fuel Transfer Electronic Meter
    NZ$100.00

    Type: Oval Gear Digital Meter

    Description: Oval gear electronic flow meters in acetal resin for controlling the non commercial dispensing of low, medium and high viscosity fluids including fuel, lubricating oil and other special fluids compatible with construction materials. Body with aluminium measuring chamber.
     
    Free contact signal pulser (reed switch), single channel.
     
    5 digit partial Total (h=11.5 mm) with floating point from 0.001 to 999.99. 8 digit non resettable Total (h=5 mm) from 1 to 99999999.
     
    Repeatability 0.2 %.
     
    Loss of pressure <0.5 bar at maximum flow rate.
     
     
    Learn More
  17. Koshin Rotary Pump SB25 & LP32
    NZ$100.00

    Type: HAND ROTARY PUMP - Fuel, Oil, Diesel, Kerosene

    Fetaures:

    Flow rate of 1 liter per revolution

    This compact pump can deliver large volume due to special roots impeller design. With easy suction and high delivery volume, this pump can transfer a full drum in only 2 minutes. 

    Light and smooth rotation

    Smooth and effortless rotation is possible due to the use of 6 ball bearing support shaft.

    View PDF

    Learn More
  18. Piusi Filters Water Captor / Clear Captor
    NZ$100.00

    WATER CAPTOR - Cartridge filters and water absorbing filters. Water separating filter. The delivery filter is a water absorbing cartridge. These filters guarantee the fundamental protection of motors using station dispensed diesel. This type of filter characteristically separates and absorbs any water present in the pumped diesel. The absorption of water however gradually causes a reduction in filtering capacity and consequently increases head loss caused by the filter. All waterlogged filters should be replaced.

    Performance:
    Filtering capacity 30 µm
    Flow rate 70 - 150 l/min
    Operating pressure 3.5 bar
    Bursting pressure 10 bar 

    CLEAR CAPTOR - Cartridge filter with transparent container and removable inner cartridge can be applied on both suction and delivery. They are available with water absorbing cartridge. The amount of impurities or water present are immediately visible in the transparent container. Any water or impurities are cleaned out by a valve set in the bottom of the container.

     

    View PDF

    Learn More
  19. Danoil 7 GG Comopsite
    NZ$100.00

    Type: Oil suction and discharge hoses

    Description: Predominantly used for transfer of oil and petroleum products, this is a more robust hose than the Danoil 3, and is therefore suitable to convey heavier products in more arduous situations.

    This hose conforms to EN13765:2010

    Learn More
  20. Danoil 3 GG Composite
    NZ$100.00

    Type: Composite - Oil suction and discharge hoses

    Description: Hose commonly used for road tanker and in plant transfer of petrol, fuel oils and lubricating oils. A well proven hose which is used by tanker fleets worldwide.

    Learn More

Grid List

Set Descending Direction

1-20 of 25

Page:
  1. 1
  2. 2