Gates

Gates

Grid List

Set Descending Direction

19 Item(s)

  1. Plant Master 200 - Adaptaflex
    NZ$100.00

    Type: Rubber - Air & Water Hose

    Applications: Air and water applications requiring maximum flexibility in any industry, including mining, construction, agriculture, vehicle repair and in-plant operations. Outstanding resistance to heat and ozone. Suitable for light agricultural spraying, such as dilute solutions of herbicides.

    Temperature: -40°C to +93°C continuous service.

    Construction:

    Tube: Type P (EPDM). Black.
    Reinforcement: Synthetic, high tensile textile cord.
    Cover: Type P (EPDM). Blue, Green or Yellow. All sizes through 1/2" are perforated.
    Design Factor: 3:1

    Branding: Continuous ink brand. Example: “Gates® Plant Master® 200 3/8 INCH (9.5mm) 300 PSI (2.07MPa) WP Made in USA”

    Standards: Tube: ARPM (Class C) Limited oil resistance.

    Learn More
  2. Chem Master DEF Transfer 350 Adblue
    NZ$100.00

    Applications: Transfer of urea solutions such as AdBlue.

    Temperature: -40°C to +100°C continuous service.

    Construction:

    Tube: Type P (EPDM). Black - Peroxide Cured - No Zinc.
    Reinforcement: Synthetic, high tensile textile cord.
    Cover: Type P (EPDM). Black. Wrapped appearance.
    Design Factor: 4:1

    Standards: Tube: Zinc and Calcium Carbonate Free.

    Learn More
  3. Chem Master Paint Spray 500 (77B)
    NZ$100.00

    Application: Paint spray applications, as well as transfer of petroleum based products (aliphatic, aromatic and chlorinated hydrocarbon such as Toluene, Xylene, Benzene, gasoline and carbon tetrachloride).
    Reference Gates Chemical Resistance Table for proper hose selection. Compatible with commercially available Bio-Diesel fuels up to B-100.

    CAUTION: Contact Gates when conveying chemicals above +49°C.

    NOT RECOMMENDED FOR ACIDS OR USE IN HIGH PRESSURE PAINT SPRAY APPLICATIONS REQUIRING A STATIC CONDUCTIVE HOSE.

    Temperature: -40°C to +66°C continuous service.

    Construction:

    Tube: Type Z (Special Flexible Nylon II). Clear.
    Reinforcement: Synthetic, high tensile textile cord.
    Cover: Type A (Neoprene). Black.
    Design Factor: 4:1

     

    Learn More
  4. Chem Master Plus XLPE 200 - Mustang
    NZ$100.00

    Recommended for: Tank truck, barge, ship or storage tank transfer of a variety of chemical products. Mustang® contains a wire helix for full suction capability, as well as for routing hoses through tight bends. Its Modified Cross-linked Polyethylene tube stock is “best in class” for maintaining a tight seal with stainless steel fittings, (see Gatron™ information below) and is designed for cleaning with “open end” 50 PSI steam or in a bath containing 10% (NaOH) @ 100°C. Cleaning in place (CIP) methods may be used.

    Not recommended for “closed steam” cleaning.

    Applications include over 950 basic chemicals that are building blocks for numerous chemicals used in a variety of industries.

    NOTE: For applications requiring greater than 90% sulphuric acid contact Gates Customer Service.

    Temperature:-40°C to +121°C normal service. Mustang® is designed to withstand fluid temperatures to +121°C; however the rating is dependent on the specific chemical conveyed.

    Contact Gates Customer Service for any chemical above +52°C.

    Construction:

    Tube: Type K (Gatron™ Modified Cross-linked Polyethylene). Tan. High chemical resistance.

    Reinforcement: Synthetic, high tensile textile with steel wire helix for full suction capability and flexibility.

    Cover: Type P (EPDM). Black corrugated with orange spiral stripe. Packaging: 30m length coiled and wrapped in polyethylene.. Branding: Continuous transfer label.

    Example: Mustang® Acid-Chemical Suction/ Discharge 200 PSI (1.38MPa) WP 

    Note: New naming system to be implemented as a running change.

    For your safety: Use Permanent Couplings above 125°F.

    Learn More
  5. Food Master Xtreme (250) SD (Food and Beverage Master)
    NZ$100.00

    Application: Transfer of milk, juice, beer, soft drinks, pharmaceuticals, cosmetics or water-based products requiring an FDA sanitary hose. It is also suitable for many dry bulk products via suction, pneumatic or gravity where a sanitary hose is required.

    Temperature: -40°C to +110°C continuous service.

    Construction:

    Tube: Type S (Sanitron™). White.
    Reinforcement: Synthetic, high tensile textile with static conductive filament; resilient monofilament helix providing crush and kink resistance.
    Cover: Type P (EPDM). White or gray with burgundy spiral stripe.
    Design Factor: 4:1

    Standards: Meets FDA requirements, 3A-Class 3 and USDA.

    Learn More
  6. Fuel Master LP350 25Bar
    NZ$100.00

    Applications: LP350 is designed to convey liquid or gaseous propane, butane, or a combination of the two. Consumer applications include gas grills, heaters, torches, and other outdoor equipment. It can also be used as an industrial transfer hose and for natural gas under certain conditions such as open/outside areas and well ventilated factory buildings (if local building codes permit).

    NOTE: Not recommended for residential or office buildings. Contact Gates Customer Service for inspection and assembly testing information. LP350 is for LPG and natural gas applications only. Do not use for anhydrous ammonia or refrigeration applications.

    Temperature: --40°C to +82°C continuous service.

    Warning: Do not convey LP Gas over +60ºC

    Construction:

    Tube: Type C (Nitrile) 1-1/4”. Black.Type A (Neoprene) 1-1/2”, 2” and 3”. Black

    Reinforcement: Braided, high tensile synthetic textile cord.

    Cover: Type A (Neoprene). Black. All sizes are perforated.

    For your safety: Use permanent fittings only.

     

    Learn More
  7. Fuel Master Curb 101 - Gasflex
    NZ$100.00

    Type: Rubber - Fuel Hose

    Applications: Dispensing all types of commercial petrol's, or other petroleum based products, from service station pumps. A heavy duty hardwall hose which does not collapse in reel use or behind the nozzle in heavy duty service.

    Temperature: -30°C to +49°C continuous service.

    Construction:

    Tube: Type C (Nitrile). Black.
    Reinforcement: Braided, high tensile steel wire.
    Cover: Type C2 (Modified Nitrile). Black.

    Standards: AS 2683/2000 Type 4 grade 2 kind 1& 2

    Learn More
  8. Vacuum Tube
    NZ$100.00

    Ideal for vacuum-operated accessories.

    Vacuum and kink-resistant construction.

    Learn More
  9. AB Series Air Brake Hose
    NZ$100.00

    Type: Rubber - Air Brake Hose

    Features:

    > Superior EPDM rubber resists damaging effects of ozone and heat, plus harmful grease and oil common to air brake systems.
    > Four spiral construction meets SAE J1402 specifications. Complies with DOT FMVSS 106 requirements.
    > Flexible and kink-resistant.
    > Designed to accept all styles of air brake couplings, including conventional brass and plastic couplings.

    Temperature rating: –40°C to +100°C

     

     

    Learn More
  10. GS VulcoFlex
    NZ$100.00

    Application: Heavy-duty flexible hose designed to replace straight or curved coolant hose. The benefit is maximum coverage with minimum inventory.Hose inside diameter remains constant from end to end. Excellent flexibility, yet collapse and kink resistant. Engineered to resist electrochemical degradation – the leading cause of hose failure.

    Temperature:-40°C to +125°C continuous service.

    CAUTION: Do not use for fuel or oil transfer applications.

    Construction:

    Tube: Type P (EPDM). Black.

    Reinforcement: Extra strength fabric reinforcement with helical steel wire.

    Cover: Type A (Neoprene). Black. Heat Resistant. Packaging: 5 lengths coiled in carton 

    For your safety: Use permanent fittings only. Standards: Tube: SAE 20R5 Type EC Class D-2.

    Learn More
  11. Charter Heater Hose
    NZ$100.00

    Type: Rubber Heater Hose

    Features:

    > Good resistance to high temperatures
    > Moderate resistance to oil and grease contamination
    > Good resistance to non-oil based coolant additives

    Temperature rating: –40°C to +125°C

    Packaging: Individual cartons

    Caution: Do not use for fuel or oil transfer applications.

    Suitable for agricultural applications.

    Learn More
  12. MPI Fuel Injection - Barricade
    NZ$100.00

    Gates Barricade MPI Fuel Injection Hose protects against the fuel mixtures of today's modern fuels. Approved for use with Gasoline, Ethanol/Gasoline blends (gasohol) such as E10, E15 or E85, Diesel, Biodiesel including soybean methyl ester (SME), rapeseed methyl ester (RME), palm methyl ester (PME), Biodiesel/Diesel blends such as B20, and 100% Methanol.

    Features:

    > 225 psi
    > Aramid Reinforcement Spiral Braid
    > Exceeds SAE J3OR14T2 as well as low-permeation requirements for CARB
    > Oil, Heat, Ozone & Abrasion-Resistant Cover

    Temperature Rating: -40° F to 275° F (-40° C to 135° C) continuous, up to 302°F (150°C) intermitten

    Note: Do not submerse in gasoline.

    Learn More
  13. Marine Master Fuel Line (SAE 30R7)
    NZ$100.00

    Application: Fuel line applications to provide flexible connections between rigid fuel distribution lines and the engine. Also for use in evaporative emission control systems and as a vent line.

    CAUTION: Not recommended for fuel injection systems.

    Temperature: -40°C to +125°C continuous service.

    Construction:

    Tube: Type C (Nitrile). Black. Oil, gasoline and gasohol resistant.
    Reinforcement: Synthetic, high tensile textile.
    Cover: Type C2 (NBR/PVC). Black. Fuel, oil, ozone and high temperature resistant.
    Design Factor: 4:1

    Standards: Exceeds requirements of SAE 30R6 and SAE 30R7.
    Hose is NMMA type accepted.
    Tube: ARPM (Class A) High oil resistance.

    Learn More
  14. Clean Master Washdown 200 FDA (113W)
    NZ$100.00

    Application: Recommended for: Hot water up to 100°C where steam is injected into the water for food handling or processing plant washdown service hose with a white cover and tube. Especially useful for dairy applications.

    CAUTION: NOT RECOMMENDED FOR USE WITH PURE STEAM.

    Temperature: -20°C to +100°C continuous service.

    Construction:

    Tube: Type P (EPDM).White.

    Reinforcement: High tensile synthetic textile cord.

    Cover: Type P (EPDM).White.All sizes are perforated.

     

    Learn More
  15. Mine Master Air Drill 500 - 18MB
    NZ$100.00

    Application: Extra heavy duty, high pressure use on industrial, construction and pneumatic mining applications requiring wire braided hose with an oil resistant tube and abrasion resistant cover.

    Temperature: -34°C to +100°C continuous service.

    Construction:

    Tube: Type A (Neoprene). Black.

    Reinforcement: Braided, high tensile steel wire.
    Cover: Type C2 (Modified Nitrile). Gray with yellow stripe. All sizes perforated. For 3/4" through 1 1/4" sizes only.
    Type D3 (Natural Rubber). Gray with yellow stripe. All sizes are perforated. For 1 1/2" through 4" sizes only.
    Design Factor: 4:1

    Standards: Tube: ARPM (Class B) Medium oil resistance.

    Learn More
  16. Plant Master Xtreme 300 Lock-On - Lola
    NZ$100.00

    Recommended for: Petroleum-base hydraulic oils, water, glycol antifreeze solutions, hot lubricating oils, and air.

    Caution: Lock-On hose and couplings are not recommended for pressure surge applications or critical applications, such as permanent piping in residential or commercial buildings. Not recommended for gasoline or diesel fuels.

    Temperature: -40°C to +100°C normal service. For air: +71°C only. For water emulsion, see Gates Hydraulic Hose Catalogue #35093.

    Construction:

    Tube: Type C (Nitrile). Black.
    Reinforcement: Braided, high tensile synthetic textile cord.
    Cover: Type C2 (Modified Nitrile).
    Design Factor: 4:1

    Branding: Continuous ink brand. Example: “Gates® Plant Master® Xtreme™ 300 Lock-On 3/4 Inch 300 psi WP Flame Resistant Cover Made in U.S.A.”

    Standards: Black cover meets MSHA 30 CFR 18.65. Flame resistant.
    Tube: ARPM (Class A) High oil resistance.
    Cover: ARPM (Class B) Medium oil resistance. Flame resistant.

     

    View PDF

    Learn More
  17. Plant Master Xtreme 250 - Premoflex
    NZ$100.00

    Recommended for: Applications requiring a premium grade spiral hose with excellent flexibility and maximum resistance to air, water, petroleum oils and lubricating oils, (to 100°C). Recommended for gasoline, kerosene and fuel oil transfer only (to 49°C). Excellent weather and ozone resistance. Approved for breathing applications such as supplied air respirators.

    Temperature: -40°C to +100°C continuous service.

    Construction:

    Tube: Type C (Nitrile). Black.
    Reinforcement: Synthetic, high tensile textile cord.
    Cover: Type C2 (Modified Nitrile). Red.
    Design Factor: 4:1

    Branding: Continuous ink brand. Example: “Gates® Plant Master® Xtreme™ 250 Multi-Purpose 3/8 Inch (9.5mm) 250 psi (1.72MPa) WP Non-Conductive at 1000V DC (>1 MEGOHM/IN.) Made in USA”

    Standards: Non-conductive at 1000 volts D.C. Electrical resistance is greater than one megohm per inch when subjected to 1000 volts D.C. Storage and use may adversely affect electrical properties.
    Tube: ARPM (Class A) High oil resistance.
    Cover: ARPM (Class B) Medium oil resistance.

    Learn More
  18. Plant Master Plus 250 - Duroflex
    NZ$100.00

    Recommended for: Applications requiring maximum flexibility and good resistance to air, water and heat. For SAE oils intermittent contact only.

    Temperature: -40°C to +93°C continuous service.


    Construction:

    Tube: Type B1 (Specially compounded elastomer). Black.
    Reinforcement: Synthetic, high tensile textile cord.
    Cover: Type P (EPDM). Red. All sizes through 1/2" have perforated cover. (Black, cover available on special order).

    Design Factor: 3:1

    Branding: Continuous ink brand. Example: “Gates® Plant Master® Plus™ 250 Multi-Purpose 3/8 Inch (9.5mm) 250 psi (1.72MPa) WP Made in USA”

    Standards: Tube: ARPM (Class B) Medium oil resistance.

    Learn More
  19. Marine Master Fuel Line 500 - C5M USCG Type A
    NZ$100.00

    Applications: All commercial and recreational vessel fuel line applications. Suitable for marine diesel, gasoline, B100 bio-diesel, gasohol fuels and hot oil applications.

    Temperature: -20°C to +100°C continuous service.

    Construction:

    Tube: Type C (Nitrile).Black. Oil and heat resistant.

    Reinforcement: Braided, high tensile steel wire.

    Cover: Type C2 (Modified Nitrile). Blue.

    Learn More

Grid List

Set Descending Direction

19 Item(s)